🇱🇰 Export to Sri Lanka

    Tungsten Carbide Grit — Sri Lanka

    Rebuilding worn parts is cheaper than importing new ones, and that economic logic drives hard-facing grit demand in Sri Lanka. Workshops maintaining quarry buckets, crusher hammers, rubber-mixing equipment and agricultural tillage blades lay down oxy-acetylene overlays loaded with crushed carbide. The 40/60 and 60/80 bands suit general overlay work, while 30/40 is chosen for heavy gouging on quarry tools. Grit is supplied at roughly 3,000 HV and apparent density 5.5–6.0 g/cc, giving repair shops a consistent carbide content to work with.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Sri Lanka

    Sri Lanka is the shortest sea lane from our Karnataka facility: consignments move from Chennai or Tuticorin to the Port of Colombo, typically within 3–6 days of vessel departure, with Nhava Sheva used when a Colombo feeder is not convenient. Tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD; whether a certificate of origin supports preferential treatment under the India–Sri Lanka Free Trade Agreement should be confirmed with your customs broker.

    Industries we supply in Sri Lanka

    Gem cutting and lapidary workshops (Ratnapura, Beruwala, Colombo)
    Vein graphite mining (Bogala and Kahatagaha–Kolongaha)
    Rubber products and solid tyre manufacturing
    Granite and aggregate quarrying for construction
    General engineering, fabrication and repair workshops

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    How quickly can a tungsten consignment reach Colombo?

    Colombo is our nearest export port. Sea freight from Chennai or Tuticorin usually arrives within 3–6 days of sailing, so small trial lots can often go by sea rather than air. Each shipment carries a commercial invoice, packing list, certificate of analysis and certificate of origin, with HS codes 8101, 2849, 2841 or 2825 depending on the product.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Sri Lanka

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.