🇱🇰 Export to Sri Lanka

    Tungsten Carbide Powder — Sri Lanka

    Sri Lanka has no large cemented carbide sintering industry, so WC powder buyers there tend to be small: diamond segment makers adding carbide for matrix hardness, and engineering workshops experimenting with wear-resistant tooling for rubber and quarry equipment. For these users the 5.0 µm F.S.S.S. grade at apparent density 3.2 g/cc is a sensible starting point. Every lot ships with total carbon min. 6.11% and free carbon max. 0.03% on the certificate, and Colombo's three-to-six-day transit means a trial quantity can be tested before committing to volume.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Sri Lanka

    Sri Lanka is the shortest sea lane from our Karnataka facility: consignments move from Chennai or Tuticorin to the Port of Colombo, typically within 3–6 days of vessel departure, with Nhava Sheva used when a Colombo feeder is not convenient. Tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD; whether a certificate of origin supports preferential treatment under the India–Sri Lanka Free Trade Agreement should be confirmed with your customs broker.

    Industries we supply in Sri Lanka

    Gem cutting and lapidary workshops (Ratnapura, Beruwala, Colombo)
    Vein graphite mining (Bogala and Kahatagaha–Kolongaha)
    Rubber products and solid tyre manufacturing
    Granite and aggregate quarrying for construction
    General engineering, fabrication and repair workshops

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    How quickly can a tungsten consignment reach Colombo?

    Colombo is our nearest export port. Sea freight from Chennai or Tuticorin usually arrives within 3–6 days of sailing, so small trial lots can often go by sea rather than air. Each shipment carries a commercial invoice, packing list, certificate of analysis and certificate of origin, with HS codes 8101, 2849, 2841 or 2825 depending on the product.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Sri Lanka

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.