🇱🇰 Export to Sri Lanka

    Tungsten Metal Powder — Sri Lanka

    Most of Sri Lanka's need for tungsten metal powder is indirect, through the diamond saw blades and core bits used by granite quarries and by stone fabricators, and the volumes involved are modest. A local segment maker or a tool repair shop re-tipping blades is the realistic buyer, usually in drum-sized lots rather than container loads. Fine 1.5–3 µm F.S.S.S. powder at apparent density 2.5 g/cc suits hot-pressed segment matrices, and every lot is certified at W min. 99.85% with oxygen max. 0.06%. The short Colombo transit makes small, frequent orders practical.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS subheading 8101.10 (tungsten powders).

    Shipping to Sri Lanka

    Sri Lanka is the shortest sea lane from our Karnataka facility: consignments move from Chennai or Tuticorin to the Port of Colombo, typically within 3–6 days of vessel departure, with Nhava Sheva used when a Colombo feeder is not convenient. Tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD; whether a certificate of origin supports preferential treatment under the India–Sri Lanka Free Trade Agreement should be confirmed with your customs broker.

    Industries we supply in Sri Lanka

    Gem cutting and lapidary workshops (Ratnapura, Beruwala, Colombo)
    Vein graphite mining (Bogala and Kahatagaha–Kolongaha)
    Rubber products and solid tyre manufacturing
    Granite and aggregate quarrying for construction
    General engineering, fabrication and repair workshops

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    How quickly can a tungsten consignment reach Colombo?

    Colombo is our nearest export port. Sea freight from Chennai or Tuticorin usually arrives within 3–6 days of sailing, so small trial lots can often go by sea rather than air. Each shipment carries a commercial invoice, packing list, certificate of analysis and certificate of origin, with HS codes 8101, 2849, 2841 or 2825 depending on the product.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Sri Lanka

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.