🇱🇰 Export to Sri Lanka

    Fused Tungsten Carbide — Sri Lanka

    Fused carbide is relevant in Sri Lanka chiefly to the makers and refurbishers of core drill bits and grinding tools used in quarrying and in graphite mine development, where abrasive rock wears ordinary bonds quickly. Hard-surfacing of excavator teeth and crusher parts is a second outlet. The material is supplied with total carbon 3.5–4.1% and apparent density 5.90 g/cc, screened to order anywhere in the ASTM/BSS −40 to +600 range. Demand is specialised and lot sizes are small, which suits the short sea crossing from Tuticorin or Chennai.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Sri Lanka

    Sri Lanka is the shortest sea lane from our Karnataka facility: consignments move from Chennai or Tuticorin to the Port of Colombo, typically within 3–6 days of vessel departure, with Nhava Sheva used when a Colombo feeder is not convenient. Tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD; whether a certificate of origin supports preferential treatment under the India–Sri Lanka Free Trade Agreement should be confirmed with your customs broker.

    Industries we supply in Sri Lanka

    Gem cutting and lapidary workshops (Ratnapura, Beruwala, Colombo)
    Vein graphite mining (Bogala and Kahatagaha–Kolongaha)
    Rubber products and solid tyre manufacturing
    Granite and aggregate quarrying for construction
    General engineering, fabrication and repair workshops

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    How quickly can a tungsten consignment reach Colombo?

    Colombo is our nearest export port. Sea freight from Chennai or Tuticorin usually arrives within 3–6 days of sailing, so small trial lots can often go by sea rather than air. Each shipment carries a commercial invoice, packing list, certificate of analysis and certificate of origin, with HS codes 8101, 2849, 2841 or 2825 depending on the product.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Sri Lanka

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.