Jayanth TungstenJayanth Tungsten ®

    🇦🇺 Export to Australia

    Tungsten Carbide Grit — Australia

    Australian manufacturers of mining drill bits, cones, and wear parts — serving the Western Australia and Queensland mining sectors — use hard-facing tungsten carbide grit to overlay components exposed to highly abrasive rock and ore handling conditions. Mesh fractions of 30/40 to 60/80 are most commonly specified for drill bit and cone overlays, where apparent density (5.5–6.0 g/cc) and Vickers hardness (~3,000 HV) determine wear life under continuous abrasive contact. Jayanth Tungsten supplies this crushed fused W₂C grit in mesh sizes from 30/40 to 100/120 to order, with total carbon and apparent density confirmed on the certificate of analysis for Australian mining equipment manufacturers.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Australia

    Shipments to Australia are routed from Nhava Sheva or Chennai to Fremantle, Melbourne, or Brisbane, with sea transit typically 3–4 weeks given the relatively short Indian Ocean crossing. Tungsten powders and compounds are classified under the Australian Harmonized Tariff (aligned with HS heading 8101 for metal/carbide powders or 2841 for tungstates); export documentation is prepared for clearance through Australian Border Force. Pricing is quoted in USD or AUD on request.

    Industries we supply in Australia

    Mineral exploration & mining drilling (Western Australia, Queensland)
    Diamond core bit and segment manufacturers
    Hard-facing and wear-part fabricators for mining equipment
    Chemical and specialty pigment importers

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    How long does shipping to Australia take?

    Sea freight from Indian ports (Nhava Sheva/Chennai) to Fremantle, Melbourne, or Brisbane typically takes 3–4 weeks. Given the relatively short Indian Ocean route compared to European or US destinations, Australia is one of our faster export lanes. Export documentation is prepared for Australian Border Force clearance.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Australia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets