Jayanth TungstenJayanth Tungsten ®

    🇷🇴 Export to Romania

    Tungsten Carbide Grit — Romania

    Hard-facing grit goes to Romanian oil and gas service companies, agricultural equipment makers and industrial repair workshops. The 40/60 band is the general workhorse for oil-field stabiliser and tool-joint overlay; 60/80 suits wear-plate cladding and agricultural tooling. Because deposition process affects how much carbide survives into the deposit — higher heat input dissolves more into the weld pool — we will discuss the welding route alongside the mesh band when a Romanian buyer is specifying for the first time.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Romania

    Shipments to Romania route from Nhava Sheva to Constanța on the Black Sea, or via Hamburg and Rotterdam with inland carriage, with transit typically 4–6 weeks depending on routing. EU Common Customs Tariff applies, with tungsten powders under HS 8101 and tungstates under 2841. Composition tables for REACH safety data sheet obligations are supplied on the certificate of analysis. Pricing is quoted in EUR or USD.

    Industries we supply in Romania

    Automotive and industrial component manufacturing
    Cemented carbide tooling and wear-part production
    Oil and gas equipment fabrication and hard facing
    Heavy engineering and machine tool manufacturing

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Do you ship directly to Constanța?

    Yes. Constanța is the usual direct routing for Romanian consignments and is often faster than going through the North Sea ports with inland carriage. We will quote both routings so you can compare total landed cost and transit time.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Romania

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets