🇷🇴 Export to Romania

    Tungsten Metal Powder — Romania

    Romanian tungsten metal powder demand centres on electrical component manufacture and the heavy engineering base around Brașov, Cluj and Ploiești. Copper-tungsten contact producers specify the mid-range 8–10 µm F.S.S.S. grade for infiltration work, where apparent density consistency governs the finished copper fraction. Jayanth Tungsten supplies all four standard grades at W min. 99.85% with oxygen max. 0.06%, documented per lot, shipped via Constanța on the Black Sea — usually the faster routing for Romanian buyers than transiting the North Sea ports.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS heading 8101.94 (tungsten powders).

    Shipping to Romania

    Shipments to Romania route from Nhava Sheva to Constanța on the Black Sea, or via Hamburg and Rotterdam with inland carriage, with transit typically 4–6 weeks depending on routing. EU Common Customs Tariff applies, with tungsten powders under HS 8101 and tungstates under 2841. Composition tables for REACH safety data sheet obligations are supplied on the certificate of analysis. Pricing is quoted in EUR or USD.

    Industries we supply in Romania

    Automotive and industrial component manufacturing
    Cemented carbide tooling and wear-part production
    Oil and gas equipment fabrication and hard facing
    Heavy engineering and machine tool manufacturing

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Do you ship directly to Constanța?

    Yes. Constanța is the usual direct routing for Romanian consignments and is often faster than going through the North Sea ports with inland carriage. We will quote both routings so you can compare total landed cost and transit time.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Romania

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.