Jayanth TungstenJayanth Tungsten ®

    🇷🇴 Export to Romania

    Fused Tungsten Carbide — Romania

    Fused tungsten carbide serves Romania's oil and gas equipment fabricators and hard-surfacing electrode producers, a sector with genuine depth given the country's long-established petroleum engineering base around Ploiești. Stabiliser blades and drilling components carrying fused carbide overlays have to survive abrasive annular flow, where failure is expensive in rig time. Supplied at total carbon 3.5–4.1%, free carbon max. 0.003%, apparent density 5.90 g/cc, screened −40 to +600 mesh with screen analysis stated per lot.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS heading 8101.99 (other tungsten articles, fused carbide).

    Shipping to Romania

    Shipments to Romania route from Nhava Sheva to Constanța on the Black Sea, or via Hamburg and Rotterdam with inland carriage, with transit typically 4–6 weeks depending on routing. EU Common Customs Tariff applies, with tungsten powders under HS 8101 and tungstates under 2841. Composition tables for REACH safety data sheet obligations are supplied on the certificate of analysis. Pricing is quoted in EUR or USD.

    Industries we supply in Romania

    Automotive and industrial component manufacturing
    Cemented carbide tooling and wear-part production
    Oil and gas equipment fabrication and hard facing
    Heavy engineering and machine tool manufacturing

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Do you ship directly to Constanța?

    Yes. Constanța is the usual direct routing for Romanian consignments and is often faster than going through the North Sea ports with inland carriage. We will quote both routings so you can compare total landed cost and transit time.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Romania

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets