🇳🇿 Export to New Zealand

    Tungsten Carbide Grit — New Zealand

    Canterbury's stony plains are notorious for wearing out cultivator tines, ploughshares and direct-drill openers, and hard-faced points are a common way to stretch replacement intervals. Agricultural engineering workshops and wear-part manufacturers are therefore the clearest New Zealand market for hard-facing grit, followed by quarry and earthmoving repair shops. The 30/40 and 40/60 fractions stand up to the gouging of river-gravel soils. Hardness is about 3,000 HV, apparent density 5.5–6.0 g/cc, and finer 60/80 or 100/120 bands are available to order.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to New Zealand

    Shipments to New Zealand route from Nhava Sheva or Chennai to Auckland, Tauranga or Lyttelton, usually transhipped at Singapore or Port Klang, with sea transit typically 4–6 weeks. Goods clear New Zealand Customs under the HS-based NZ tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is quoted in NZD or USD, and certificates of analysis carry the composition data importers use for their hazardous substances (HSNO) obligations.

    Industries we supply in New Zealand

    Forestry, sawmilling and wood processing (Bay of Plenty, central North Island)
    Geothermal drilling (Taupō Volcanic Zone)
    Gold mining and mineral exploration (Waihi, West Coast, Otago)
    Agricultural engineering and ground-engaging tools (Canterbury)
    Industrial water treatment for dairy processing and power generation

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Are there biosecurity requirements for packaging sent to New Zealand?

    Yes. New Zealand's Ministry for Primary Industries checks imported packaging, and any wooden pallets or crates must carry ISPM 15 treatment marking. We confirm the packaging type before dispatch so the consignment clears biosecurity alongside customs at Auckland, Tauranga or Lyttelton.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for New Zealand

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.