🇳🇿 Export to New Zealand

    Fused Tungsten Carbide — New Zealand

    Geothermal wells in the Taupō Volcanic Zone and gold exploration around Waihi, the West Coast and Otago all rely on diamond core bits and hard-faced drilling tools working in abrasive, sometimes hot ground. Drilling service firms and bit refurbishers are New Zealand's main users of fused tungsten carbide, setting it into bit matrices or applying it as hard-surfacing. It is supplied crushed to ASTM/BSS −40 to +600 mesh to order, with total carbon of 3.5–4.1% and apparent density 5.90 g/cc.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to New Zealand

    Shipments to New Zealand route from Nhava Sheva or Chennai to Auckland, Tauranga or Lyttelton, usually transhipped at Singapore or Port Klang, with sea transit typically 4–6 weeks. Goods clear New Zealand Customs under the HS-based NZ tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is quoted in NZD or USD, and certificates of analysis carry the composition data importers use for their hazardous substances (HSNO) obligations.

    Industries we supply in New Zealand

    Forestry, sawmilling and wood processing (Bay of Plenty, central North Island)
    Geothermal drilling (Taupō Volcanic Zone)
    Gold mining and mineral exploration (Waihi, West Coast, Otago)
    Agricultural engineering and ground-engaging tools (Canterbury)
    Industrial water treatment for dairy processing and power generation

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Are there biosecurity requirements for packaging sent to New Zealand?

    Yes. New Zealand's Ministry for Primary Industries checks imported packaging, and any wooden pallets or crates must carry ISPM 15 treatment marking. We confirm the packaging type before dispatch so the consignment clears biosecurity alongside customs at Auckland, Tauranga or Lyttelton.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for New Zealand

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.