🇳🇿 Export to New Zealand

    Tungsten Metal Powder — New Zealand

    New Zealand's tungsten metal powder demand is small and mostly indirect. The plausible direct buyers are diamond tool and drill-bit workshops supplying the mineral exploration and geothermal drilling sectors, plus engineering firms producing radiation shielding or counterweights. For dense filler work the 12–15 µm F.S.S.S. grade at 6.2 g/cc packs best, while fine 1.5–3 µm powder is used in hot-pressed segments. Every lot is certified at W min. 99.85% with oxygen max. 0.06%, and pricing can be quoted in NZD.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS subheading 8101.10 (tungsten powders).

    Shipping to New Zealand

    Shipments to New Zealand route from Nhava Sheva or Chennai to Auckland, Tauranga or Lyttelton, usually transhipped at Singapore or Port Klang, with sea transit typically 4–6 weeks. Goods clear New Zealand Customs under the HS-based NZ tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is quoted in NZD or USD, and certificates of analysis carry the composition data importers use for their hazardous substances (HSNO) obligations.

    Industries we supply in New Zealand

    Forestry, sawmilling and wood processing (Bay of Plenty, central North Island)
    Geothermal drilling (Taupō Volcanic Zone)
    Gold mining and mineral exploration (Waihi, West Coast, Otago)
    Agricultural engineering and ground-engaging tools (Canterbury)
    Industrial water treatment for dairy processing and power generation

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Are there biosecurity requirements for packaging sent to New Zealand?

    Yes. New Zealand's Ministry for Primary Industries checks imported packaging, and any wooden pallets or crates must carry ISPM 15 treatment marking. We confirm the packaging type before dispatch so the consignment clears biosecurity alongside customs at Auckland, Tauranga or Lyttelton.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for New Zealand

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.