🇰🇿 Export to Kazakhstan

    Tungsten Carbide Grit — Kazakhstan

    Oilfield stabilisers, mining drill bits, crusher parts and agricultural tillage tools all wear out quickly in Kazakhstan, and hard-facing grit is how local workshops extend their service life. Demand comes from oil service bases in the Caspian region, mine maintenance shops in East Kazakhstan and Karaganda, and the farm equipment trade in the grain-growing north. Jayanth Tungsten supplies grit at approximately 3,000 HV, apparent density 5.5–6.0 g/cc, in 30/40, 40/60, 60/80 and 100/120 mesh bands.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Kazakhstan

    Kazakhstan has no ocean port, so consignments usually go by sea from Nhava Sheva to a Chinese east-coast port and then by rail through the Khorgos or Dostyk border crossings to Almaty or the industrial north and east, or via the Caspian route into Aktau; total transit is typically 6–8 weeks, and air freight to Almaty suits small or urgent lots. As a Eurasian Economic Union member, Kazakhstan applies the EAEU common customs tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Kazakhstan

    Oil and gas drilling and field services (Atyrau and Mangystau regions)
    Copper, zinc and polymetallic mining in East Kazakhstan (Oskemen) and Karaganda
    Uranium and coal mining operations
    Ferroalloy, steel and heavy engineering plants (Pavlodar, Karaganda, Aktobe)

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    What is the shipping route to Kazakhstan?

    The usual routing is sea freight to a Chinese port followed by rail through Khorgos or Dostyk, with a Caspian alternative via Aktau; door-to-door transit is typically 6–8 weeks. For small or urgent quantities, air freight to Almaty is quoted. Documentation is prepared for clearance under the EAEU common customs tariff.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Kazakhstan

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.