🇰🇿 Export to Kazakhstan

    Fused Tungsten Carbide — Kazakhstan

    Fused tungsten carbide matches Kazakhstan's drilling-heavy industries closely. Oil and gas contractors in the west use it in hard-faced stabilisers and bit bodies, while mineral exploration crews in the east and centre rely on it as reinforcement in diamond core bit matrices. The material is crushed W₂C at 3.5–4.1% total carbon with apparent density 5.90 g/cc, screened to ASTM/BSS fractions between −40 and +600 mesh, and the long rail leg is planned for with moisture-resistant packing.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Kazakhstan

    Kazakhstan has no ocean port, so consignments usually go by sea from Nhava Sheva to a Chinese east-coast port and then by rail through the Khorgos or Dostyk border crossings to Almaty or the industrial north and east, or via the Caspian route into Aktau; total transit is typically 6–8 weeks, and air freight to Almaty suits small or urgent lots. As a Eurasian Economic Union member, Kazakhstan applies the EAEU common customs tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Kazakhstan

    Oil and gas drilling and field services (Atyrau and Mangystau regions)
    Copper, zinc and polymetallic mining in East Kazakhstan (Oskemen) and Karaganda
    Uranium and coal mining operations
    Ferroalloy, steel and heavy engineering plants (Pavlodar, Karaganda, Aktobe)

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    What is the shipping route to Kazakhstan?

    The usual routing is sea freight to a Chinese port followed by rail through Khorgos or Dostyk, with a Caspian alternative via Aktau; door-to-door transit is typically 6–8 weeks. For small or urgent quantities, air freight to Almaty is quoted. Documentation is prepared for clearance under the EAEU common customs tariff.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Kazakhstan

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.