🇰🇿 Export to Kazakhstan

    Tungsten Carbide Powder — Kazakhstan

    WC powder in Kazakhstan serves two quite different buyers: oilfield service and drilling tool shops in Atyrau and Mangystau, and wear-part producers attached to the copper, coal and ferroalloy industries. Both lean toward the coarser F.S.S.S. grades of 10.0 and 15.0 µm, although finer 2.5 and 5.0 µm powders are available for tooling. Jayanth Tungsten specifies total carbon min. 6.11% (bonded) and free carbon max. 0.03%, and states both values on every certificate so qualification can proceed without guesswork.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Kazakhstan

    Kazakhstan has no ocean port, so consignments usually go by sea from Nhava Sheva to a Chinese east-coast port and then by rail through the Khorgos or Dostyk border crossings to Almaty or the industrial north and east, or via the Caspian route into Aktau; total transit is typically 6–8 weeks, and air freight to Almaty suits small or urgent lots. As a Eurasian Economic Union member, Kazakhstan applies the EAEU common customs tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Kazakhstan

    Oil and gas drilling and field services (Atyrau and Mangystau regions)
    Copper, zinc and polymetallic mining in East Kazakhstan (Oskemen) and Karaganda
    Uranium and coal mining operations
    Ferroalloy, steel and heavy engineering plants (Pavlodar, Karaganda, Aktobe)

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    What is the shipping route to Kazakhstan?

    The usual routing is sea freight to a Chinese port followed by rail through Khorgos or Dostyk, with a Caspian alternative via Aktau; door-to-door transit is typically 6–8 weeks. For small or urgent quantities, air freight to Almaty is quoted. Documentation is prepared for clearance under the EAEU common customs tariff.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Kazakhstan

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.