🇬🇭 Export to Ghana

    Tungsten Carbide Grit — Ghana

    For Ghana, hard-facing grit is arguably the most practical Jayanth product. Mine maintenance contractors near Tarkwa, Obuasi and Takoradi overlay excavator teeth, bucket lips, crusher hammers and slurry pump parts that take constant abrasion from gold ore and gravel. Coarse 30/40 holds up best under impact, while 60/80 suits sliding wear. Hardness of about 3,000 HV and apparent density 5.5–6.0 g/cc give overlays that extend part life, and the Takoradi routing keeps freight close to the mines.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Ghana

    Shipments to Ghana route from Nhava Sheva or Chennai to Tema, or to Takoradi for buyers in the Western Region mining and offshore-service belt, with sea transit typically 4–5 weeks including transhipment. Ghana applies the ECOWAS Common External Tariff, and tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Ghana

    Gold mining and exploration drilling (Ashanti and Western Regions — Obuasi, Tarkwa)
    Mining equipment wear-part fabrication and hard-facing workshops
    Offshore oil and gas support services (Takoradi)
    Quarrying, aggregate and construction contractors

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Should I ship to Tema or Takoradi?

    Tema handles most general cargo and suits buyers around Accra, while Takoradi sits closer to the Tarkwa gold belt and the offshore oil support base. Transit from Nhava Sheva or Chennai is typically 4–5 weeks to either port; we quote the routing that minimises inland haulage to your site.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Ghana

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.