🇬🇭 Export to Ghana

    Tungsten Metal Powder — Ghana

    Ghana's gold sector shapes its tungsten metal powder demand. Exploration drilling across the Ashanti and Western Regions consumes impregnated diamond core bits, and the workshops that make or re-segment those bits use tungsten powder to set matrix hardness against lateritic and quartz-veined ground. Outside that, demand is slight. Jayanth Tungsten supplies the 1.5–3 and 4–6 µm F.S.S.S. grades suited to hot-pressed segments at apparent densities of 2.5–3.4 g/cc, with W min. 99.85% and O max. 0.06% certified.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS subheading 8101.10 (tungsten powders).

    Shipping to Ghana

    Shipments to Ghana route from Nhava Sheva or Chennai to Tema, or to Takoradi for buyers in the Western Region mining and offshore-service belt, with sea transit typically 4–5 weeks including transhipment. Ghana applies the ECOWAS Common External Tariff, and tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Ghana

    Gold mining and exploration drilling (Ashanti and Western Regions — Obuasi, Tarkwa)
    Mining equipment wear-part fabrication and hard-facing workshops
    Offshore oil and gas support services (Takoradi)
    Quarrying, aggregate and construction contractors

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Should I ship to Tema or Takoradi?

    Tema handles most general cargo and suits buyers around Accra, while Takoradi sits closer to the Tarkwa gold belt and the offshore oil support base. Transit from Nhava Sheva or Chennai is typically 4–5 weeks to either port; we quote the routing that minimises inland haulage to your site.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Ghana

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.