🇬🇭 Export to Ghana

    Tungsten Carbide Powder — Ghana

    In Ghana, WC powder is ordered mostly by bit-matrix producers and wear-component shops working for gold mines around Tarkwa and Obuasi, where crushers, mill liners and drill tooling wear fast in abrasive ore. With little local carbide sintering, powder is typically used in matrix blends and hard-facing rather than pressed inserts. Coarser 10.0 and 15.0 µm F.S.S.S. grades suit this work. Each lot meets total carbon min. 6.11% and free carbon max. 0.03%, both recorded on the certificate.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Ghana

    Shipments to Ghana route from Nhava Sheva or Chennai to Tema, or to Takoradi for buyers in the Western Region mining and offshore-service belt, with sea transit typically 4–5 weeks including transhipment. Ghana applies the ECOWAS Common External Tariff, and tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD.

    Industries we supply in Ghana

    Gold mining and exploration drilling (Ashanti and Western Regions — Obuasi, Tarkwa)
    Mining equipment wear-part fabrication and hard-facing workshops
    Offshore oil and gas support services (Takoradi)
    Quarrying, aggregate and construction contractors

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    Should I ship to Tema or Takoradi?

    Tema handles most general cargo and suits buyers around Accra, while Takoradi sits closer to the Tarkwa gold belt and the offshore oil support base. Transit from Nhava Sheva or Chennai is typically 4–5 weeks to either port; we quote the routing that minimises inland haulage to your site.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Ghana

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.