🇪🇬 Export to Egypt

    Tungsten Carbide Grit — Egypt

    Hard-facing grit sells in Egypt wherever steel meets abrasive ground: stabilisers and bit bodies for Western Desert drilling, crusher and mixer parts in cement plants, and excavator teeth in limestone quarries. Repair shops apply it by oxy-acetylene overlay, usually choosing 30/40 for heavy gouging and 60/80 for finer sliding wear. With hardness close to 3,000 HV and apparent density 5.5–6.0 g/cc, the grit sinks evenly into the weld pool, which is what keeps an overlay's wear life repeatable from one job to the next.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Egypt

    Shipments to Egypt route from Nhava Sheva or Mumbai to Sokhna on the Red Sea, typically 2–3 weeks by sea, or through the Suez Canal to Alexandria, Damietta or East Port Said for buyers in the Delta, typically 3–4 weeks. Customs classification follows tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90), and Egypt's advance cargo information (ACI) system requires the importer to register the consignment and obtain an ACID number before the goods are loaded. Pricing is quoted in USD.

    Industries we supply in Egypt

    Marble and granite quarrying and processing (Shaq El Thoban, Cairo; Red Sea and Minya quarries)
    Oil and gas drilling in the Western Desert and Gulf of Suez
    Construction, cement and infrastructure contractors
    Steel and foundry wear-part fabrication
    Diamond saw blade and stone-cutting tool workshops

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Can you ship to Egypt under the ACI/ACID pre-registration system?

    Yes. Once you, as the Egyptian importer, register the shipment and share the ACID number, it is shown on the commercial invoice and bill of lading before loading. We can route to Sokhna for the shortest Red Sea transit or to Alexandria, Damietta or East Port Said for Delta and Mediterranean-side delivery.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Egypt

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.