🇪🇬 Export to Egypt

    Tungsten Carbide Powder — Egypt

    Buyers of WC powder in Egypt are mostly workshops pressing wear parts and drilling inserts for oil-field service companies in the Western Desert and Gulf of Suez, plus segment makers who blend carbide into stone-cutting bonds. Domestic cemented carbide production is limited, so this is a specialist rather than volume market. Grades of 5.0 and 10.0 µm F.S.S.S. cover most enquiries. Bonded carbon never drops below 6.11% and free carbon stays under 0.03%, figures stated on the certificate so a sintering shop can set its carbon balance before the first press run.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Egypt

    Shipments to Egypt route from Nhava Sheva or Mumbai to Sokhna on the Red Sea, typically 2–3 weeks by sea, or through the Suez Canal to Alexandria, Damietta or East Port Said for buyers in the Delta, typically 3–4 weeks. Customs classification follows tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90), and Egypt's advance cargo information (ACI) system requires the importer to register the consignment and obtain an ACID number before the goods are loaded. Pricing is quoted in USD.

    Industries we supply in Egypt

    Marble and granite quarrying and processing (Shaq El Thoban, Cairo; Red Sea and Minya quarries)
    Oil and gas drilling in the Western Desert and Gulf of Suez
    Construction, cement and infrastructure contractors
    Steel and foundry wear-part fabrication
    Diamond saw blade and stone-cutting tool workshops

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    Can you ship to Egypt under the ACI/ACID pre-registration system?

    Yes. Once you, as the Egyptian importer, register the shipment and share the ACID number, it is shown on the commercial invoice and bill of lading before loading. We can route to Sokhna for the shortest Red Sea transit or to Alexandria, Damietta or East Port Said for Delta and Mediterranean-side delivery.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Egypt

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.