🇪🇬 Export to Egypt

    Fused Tungsten Carbide — Egypt

    Fused tungsten carbide finds two Egyptian users: diamond tool makers reinforcing segment matrices against abrasive sandstone and granite slurries, and fabricators producing hard-surfacing rods for oil-field and cement-plant repair. Melting near 3000 °C and cast before crushing, W₂C/WC eutectic grit resists the scouring that strips softer bonds. Our material carries 3.5–4.1% total carbon at an apparent density of 5.90 g/cc, screened anywhere from ASTM/BSS −40 to +600 mesh, so a buyer can match the fraction to a matrix recipe or a tube-rod filler.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Egypt

    Shipments to Egypt route from Nhava Sheva or Mumbai to Sokhna on the Red Sea, typically 2–3 weeks by sea, or through the Suez Canal to Alexandria, Damietta or East Port Said for buyers in the Delta, typically 3–4 weeks. Customs classification follows tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90), and Egypt's advance cargo information (ACI) system requires the importer to register the consignment and obtain an ACID number before the goods are loaded. Pricing is quoted in USD.

    Industries we supply in Egypt

    Marble and granite quarrying and processing (Shaq El Thoban, Cairo; Red Sea and Minya quarries)
    Oil and gas drilling in the Western Desert and Gulf of Suez
    Construction, cement and infrastructure contractors
    Steel and foundry wear-part fabrication
    Diamond saw blade and stone-cutting tool workshops

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Can you ship to Egypt under the ACI/ACID pre-registration system?

    Yes. Once you, as the Egyptian importer, register the shipment and share the ACID number, it is shown on the commercial invoice and bill of lading before loading. We can route to Sokhna for the shortest Red Sea transit or to Alexandria, Damietta or East Port Said for Delta and Mediterranean-side delivery.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Egypt

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.