🇧🇬 Export to Bulgaria

    Tungsten Carbide Grit — Bulgaria

    Arable farming across the Danubian Plain and the Upper Thracian Plain gives hard-facing grit a practical outlet in Bulgaria. Ploughshares, cultivator points and seed-drill coulters wear quickly in stony ground, and a carbide overlay slows that down. Repair workshops servicing quarry and mining equipment are the other buyers. For agricultural tooling the 60/80 and 100/120 fractions give a smoother, denser deposit, whereas 30/40 suits heavy gouging wear on bucket lips. Hardness is roughly 3,000 HV, with apparent density 5.5–6.0 g/cc.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Bulgaria

    Shipments to Bulgaria route from Nhava Sheva or Chennai through the Suez Canal to Varna or Burgas on the Black Sea, normally with transhipment at Piraeus or a Turkish hub, for a total transit of about 4–6 weeks. As an EU member state Bulgaria applies the Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90), with composition data supplied to support REACH safety data sheets. Pricing is quoted in EUR or USD.

    Industries we supply in Bulgaria

    Copper and gold mining (Panagyurishte and Etropole districts)
    Machine building and metalworking (Plovdiv, Gabrovo, Sofia)
    Natural stone quarrying and processing (Vratsa limestone, Rhodope marble)
    Agricultural equipment repair across the Danubian and Upper Thracian plains
    Chemical distribution and industrial water treatment (Varna–Devnya)

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Can you ship directly to Varna or Burgas?

    Yes. Black Sea routing to Varna or Burgas, usually transhipped at Piraeus or a Turkish hub, is the normal option and takes about 4–6 weeks. If a buyer is based in western Bulgaria, discharge at a North Sea port with road haulage onward can occasionally be competitive, so we can quote both routings for comparison.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Bulgaria

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.