🇧🇬 Export to Bulgaria

    Tungsten Metal Powder — Bulgaria

    Bulgaria buys tungsten metal powder in modest volumes, mostly for two uses: diamond segments for the stone sector, which saws and shapes limestone from the Vratsa area and marble from the Rhodopes, and copper-tungsten electrical parts made by component suppliers around Plovdiv and Sofia. Segment makers tend to choose the 1.5–3 µm F.S.S.S. grade for hot pressing, while infiltration work runs better on coarser powder with higher apparent density, up to 6.2 g/cc at 12–15 µm. Every lot is certified at W min. 99.85% and O max. 0.06%.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS subheading 8101.10 (tungsten powders).

    Shipping to Bulgaria

    Shipments to Bulgaria route from Nhava Sheva or Chennai through the Suez Canal to Varna or Burgas on the Black Sea, normally with transhipment at Piraeus or a Turkish hub, for a total transit of about 4–6 weeks. As an EU member state Bulgaria applies the Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90), with composition data supplied to support REACH safety data sheets. Pricing is quoted in EUR or USD.

    Industries we supply in Bulgaria

    Copper and gold mining (Panagyurishte and Etropole districts)
    Machine building and metalworking (Plovdiv, Gabrovo, Sofia)
    Natural stone quarrying and processing (Vratsa limestone, Rhodope marble)
    Agricultural equipment repair across the Danubian and Upper Thracian plains
    Chemical distribution and industrial water treatment (Varna–Devnya)

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Can you ship directly to Varna or Burgas?

    Yes. Black Sea routing to Varna or Burgas, usually transhipped at Piraeus or a Turkish hub, is the normal option and takes about 4–6 weeks. If a buyer is based in western Bulgaria, discharge at a North Sea port with road haulage onward can occasionally be competitive, so we can quote both routings for comparison.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Bulgaria

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.