🇧🇬 Export to Bulgaria

    Fused Tungsten Carbide — Bulgaria

    Where Bulgarian buyers order fused tungsten carbide, it usually ends up in one of two places: hard-surfacing rods and electrodes used to rebuild excavator teeth, crusher parts and drilling tools in the mining districts, or the matrix of diamond core bits for exploration and quarry drilling. Its cast structure, with total carbon of 3.5–4.1% and a melting point near 3000 °C, resists the abrasive slurry that strips softer bonds. Crushed fractions are screened anywhere from −40 to +600 ASTM/BSS mesh to order, at apparent density 5.90 g/cc.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Bulgaria

    Shipments to Bulgaria route from Nhava Sheva or Chennai through the Suez Canal to Varna or Burgas on the Black Sea, normally with transhipment at Piraeus or a Turkish hub, for a total transit of about 4–6 weeks. As an EU member state Bulgaria applies the Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90), with composition data supplied to support REACH safety data sheets. Pricing is quoted in EUR or USD.

    Industries we supply in Bulgaria

    Copper and gold mining (Panagyurishte and Etropole districts)
    Machine building and metalworking (Plovdiv, Gabrovo, Sofia)
    Natural stone quarrying and processing (Vratsa limestone, Rhodope marble)
    Agricultural equipment repair across the Danubian and Upper Thracian plains
    Chemical distribution and industrial water treatment (Varna–Devnya)

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Can you ship directly to Varna or Burgas?

    Yes. Black Sea routing to Varna or Burgas, usually transhipped at Piraeus or a Turkish hub, is the normal option and takes about 4–6 weeks. If a buyer is based in western Bulgaria, discharge at a North Sea port with road haulage onward can occasionally be competitive, so we can quote both routings for comparison.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Bulgaria

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.