🇮🇪 Export to Ireland

    Tungsten Carbide Grit — Ireland

    Quarry operators and aggregate producers across the Irish Midlands wear out crusher components, screen decks and loader edges quickly in hard limestone and greywacke, and hard-facing grit is how repair shops extend the life of those parts. Mining contractors working the zinc-lead deposits near Navan face similar abrasion on ground-engaging tools. Grit at roughly 3,000 HV with apparent density 5.5–6.0 g/cc is offered in 30/40, 40/60, 60/80 and 100/120 mesh, with the coarser bands generally preferred where gouging wear dominates.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Ireland

    Consignments for Ireland leave Nhava Sheva or Chennai and are usually transhipped at Rotterdam or Antwerp onto feeder services into Dublin or Cork, with door-to-port transit typically 5–6 weeks. Ireland clears under the EU Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90), with composition data supplied to support REACH safety data sheets. Prices are quoted in EUR or USD.

    Industries we supply in Ireland

    Medical device manufacturing using radiopaque and shielding fillers (Galway, Limerick)
    Synthetic diamond and superabrasive tooling (Shannon region)
    Quarrying, aggregates and zinc-lead mining (Navan and the Midlands)
    Electronics and precision engineering (Cork, Limerick)
    Pharmaceutical and fine chemical research laboratories

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Is there a direct sailing from India to Dublin or Cork?

    Most Irish consignments are transhipped at a North Sea hub such as Rotterdam or Antwerp and then carried on a feeder vessel to Dublin or Cork, so total transit is usually 5–6 weeks. For small lots, air freight into Dublin is often more practical. Documents are prepared for EU customs clearance in Ireland under the HS code that matches the product.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Ireland

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.