🇮🇪 Export to Ireland

    Tungsten Carbide Powder — Ireland

    Ireland has no large cemented carbide sintering base, so demand for WC powder is limited and comes chiefly from superabrasive and diamond tool makers in the Shannon region and a handful of precision engineering firms producing wear parts. These users tend to want the 5.0 µm or 10.0 µm F.S.S.S. grades as a hard phase in metal bonds rather than for pressing inserts. Each lot is held at total carbon min. 6.11% (bonded) and free carbon max. 0.03%, figures stated on the certificate so an Irish quality team can qualify the material quickly.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Ireland

    Consignments for Ireland leave Nhava Sheva or Chennai and are usually transhipped at Rotterdam or Antwerp onto feeder services into Dublin or Cork, with door-to-port transit typically 5–6 weeks. Ireland clears under the EU Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90), with composition data supplied to support REACH safety data sheets. Prices are quoted in EUR or USD.

    Industries we supply in Ireland

    Medical device manufacturing using radiopaque and shielding fillers (Galway, Limerick)
    Synthetic diamond and superabrasive tooling (Shannon region)
    Quarrying, aggregates and zinc-lead mining (Navan and the Midlands)
    Electronics and precision engineering (Cork, Limerick)
    Pharmaceutical and fine chemical research laboratories

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    Is there a direct sailing from India to Dublin or Cork?

    Most Irish consignments are transhipped at a North Sea hub such as Rotterdam or Antwerp and then carried on a feeder vessel to Dublin or Cork, so total transit is usually 5–6 weeks. For small lots, air freight into Dublin is often more practical. Documents are prepared for EU customs clearance in Ireland under the HS code that matches the product.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Ireland

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.