Jayanth TungstenJayanth Tungsten ®

    🇭🇺 Export to Hungary

    Tungsten Carbide Grit — Hungary

    Hard-facing grit serves Hungarian agricultural equipment manufacturers and industrial wear-protection workshops. Agricultural tillage tools — points, shares and sweeps working the sandy and stony soils of the Great Plain — are a natural fit for overlay, where grit can multiply the service life of a wearing edge at modest cost per part. Standard macro-grit bands of 30/40 through 100/120 are supplied at approximately 3000 HV, with 60/80 common for the mixed abrasion typical of agricultural service.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Hungary

    Shipments to Hungary route from Nhava Sheva to Hamburg, Rotterdam or Koper, then inland by rail or road to Budapest and the industrial corridor, with total transit typically 5–6 weeks. As an EU member state, Hungary clears under the EU Common Customs Tariff, with tungsten powders under HS 8101 and tungstates under 2841. Full composition tables are supplied on the certificate of analysis to support REACH safety data sheet obligations. Pricing is quoted in EUR or USD.

    Industries we supply in Hungary

    Automotive component and tooling manufacturers
    Cemented carbide tool producers and regrinding services
    Precision engineering and die manufacturing
    Electrical component and connector manufacturers

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Do you supply chemistry data formatted for REACH compliance in Hungary?

    Yes. As an EU member state, Hungarian importers of tungsten chemical products carry REACH safety data sheet obligations. We provide a full composition table on the certificate of analysis for sodium tungstate, APT and tungsten oxides to support those obligations and your incoming-material qualification records.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Hungary

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets