Jayanth TungstenJayanth Tungsten ®

    🇭🇺 Export to Hungary

    Fused Tungsten Carbide — Hungary

    Fused tungsten carbide goes to Hungary mainly for hard-surfacing electrode manufacture and wear-overlay work in heavy engineering, rather than the drilling applications that drive demand in mining economies. Screened ASTM/BSS −40 to +600 mesh to requirement, at total carbon 3.5–4.1% with free carbon max. 0.003% — a limit an order of magnitude tighter than sintered WC, because free graphite in a cast and crushed structure acts as a crack initiation site in a material with almost no fracture toughness.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS heading 8101.99 (other tungsten articles, fused carbide).

    Shipping to Hungary

    Shipments to Hungary route from Nhava Sheva to Hamburg, Rotterdam or Koper, then inland by rail or road to Budapest and the industrial corridor, with total transit typically 5–6 weeks. As an EU member state, Hungary clears under the EU Common Customs Tariff, with tungsten powders under HS 8101 and tungstates under 2841. Full composition tables are supplied on the certificate of analysis to support REACH safety data sheet obligations. Pricing is quoted in EUR or USD.

    Industries we supply in Hungary

    Automotive component and tooling manufacturers
    Cemented carbide tool producers and regrinding services
    Precision engineering and die manufacturing
    Electrical component and connector manufacturers

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Do you supply chemistry data formatted for REACH compliance in Hungary?

    Yes. As an EU member state, Hungarian importers of tungsten chemical products carry REACH safety data sheet obligations. We provide a full composition table on the certificate of analysis for sodium tungstate, APT and tungsten oxides to support those obligations and your incoming-material qualification records.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Hungary

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets