Jayanth TungstenJayanth Tungsten ®

    🇩🇪 Export to Germany

    Tungsten Carbide Grit — Germany

    German hard-facing fabricators and wear-plate manufacturers — supplying the construction machinery, mining equipment, and agricultural implement sectors — use crushed fused tungsten carbide grit (apparent density 5.5–6.0 g/cc, total carbon 3.5–4.1%, Vickers hardness ~3,000 HV) as the wear-resistant aggregate in OAW overlay electrodes and cladding plates applied to bucket lips, crusher jaw faces, and tillage points. German hard-facing producers qualify incoming grit to mesh fraction, apparent density, and carbon content confirmed on the certificate of analysis, and typically source in mesh sizes from 40/60 to 100/120 for electrode fill applications. Jayanth Tungsten supplies mesh fractions from 30/40 to 100/120 to order, with all lot properties documented for German hard-facing electrode and wear-plate manufacturers.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Germany

    Shipments to Germany are routed from Nhava Sheva or Mumbai to Hamburg or Rotterdam, with sea transit typically 3–4 weeks, followed by overland delivery within Germany. Tungsten powders and carbides fall under EU Combined Nomenclature heading 8101; tungstate chemicals under CN 2841. Chemical products are supplied with full chemistry data on the certificate of analysis to support REACH SDS documentation required for EU import. Pricing is quoted in EUR or USD on request.

    Industries we supply in Germany

    Cemented carbide and hardmetal tooling manufacturers (Widia, Walter AG, Ceratizit)
    Electrical contact and copper-tungsten connector producers
    Hard-facing electrode and wear-plate manufacturers
    Ceramic pigment and specialty chemical processors

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Can you supply chemistry data formatted for REACH compliance in Germany?

    Yes — for all chemical products (sodium tungstate, APT, tungsten oxides) shipped to Germany we provide a full composition table on the certificate of analysis to support your REACH SDS obligations and incoming-material qualification records. Shipments clear Hamburg or Rotterdam customs under the applicable CN heading.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Germany

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets