Jayanth TungstenJayanth Tungsten ®

    🇩🇪 Export to Germany

    Fused Tungsten Carbide — Germany

    German hard-facing electrode manufacturers — including producers supplying the agricultural, mining, and construction equipment sectors — use fused tungsten carbide (W₂C) grit as the wear-resistant filler phase in overlay welding electrodes applied to excavator buckets, crusher hammers, and tillage tool components. The German agricultural machinery belt and construction equipment sector represent significant consumers of hard-facing consumables where apparent density (5.90 g/cc), total carbon (3.5–4.1%), and mesh fraction consistency determine overlay hardness and wear life. Jayanth Tungsten supplies fused W₂C as crushed grit in ASTM/BSS mesh fractions from 30/40 to 100/120 to order, with each lot's properties confirmed on the certificate of analysis for German hard-facing electrode manufacturers.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS heading 8101.99 (other tungsten articles, fused carbide).

    Shipping to Germany

    Shipments to Germany are routed from Nhava Sheva or Mumbai to Hamburg or Rotterdam, with sea transit typically 3–4 weeks, followed by overland delivery within Germany. Tungsten powders and carbides fall under EU Combined Nomenclature heading 8101; tungstate chemicals under CN 2841. Chemical products are supplied with full chemistry data on the certificate of analysis to support REACH SDS documentation required for EU import. Pricing is quoted in EUR or USD on request.

    Industries we supply in Germany

    Cemented carbide and hardmetal tooling manufacturers (Widia, Walter AG, Ceratizit)
    Electrical contact and copper-tungsten connector producers
    Hard-facing electrode and wear-plate manufacturers
    Ceramic pigment and specialty chemical processors

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Can you supply chemistry data formatted for REACH compliance in Germany?

    Yes — for all chemical products (sodium tungstate, APT, tungsten oxides) shipped to Germany we provide a full composition table on the certificate of analysis to support your REACH SDS obligations and incoming-material qualification records. Shipments clear Hamburg or Rotterdam customs under the applicable CN heading.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Germany

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets