Jayanth TungstenJayanth Tungsten ®

    🇪🇺 Export to Europe

    Tungsten Carbide Grit — Europe

    European hard-facing electrode and wear-plate manufacturers, concentrated in Germany and Poland, use crushed fused tungsten carbide grit as the abrasion-resistant filler in overlay welding electrodes and cladding plates for excavator, crusher, and agricultural equipment components. Mesh fractions from 40/60 to 100/120 are typical for electrode core-fill applications, where apparent density (5.5–6.0 g/cc), total carbon (3.5–4.1%), and Vickers hardness (~3,000 HV) determine the wear performance of the finished overlay. Jayanth Tungsten supplies this grit in mesh sizes from 30/40 to 100/120 to order, with properties documented on the certificate of analysis for European hard-facing manufacturers.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Europe

    Shipments to continental Europe are routed via Nhava Sheva or Mumbai to Rotterdam, Hamburg, or Antwerp, with sea transit typically 3–4 weeks, then onward distribution within the EU customs union. Tungsten powders and compounds fall under EU Combined Nomenclature heading 8101 (powders/carbides) or 2841 (tungstates); chemical products such as sodium tungstate and tungsten oxides are supplied with chemistry data to support REACH documentation. Pricing is quoted in EUR or USD on request.

    Industries we supply in Europe

    German, Czech & Austrian cemented carbide / hard-metal industry
    Scandinavian cutting-tool and electrical contact manufacturers
    Dutch and Belgian chemical processors and pigment formulators
    Diamond tool and hard-facing electrode producers

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Do you provide REACH-relevant documentation for chemical products?

    For sodium tungstate, APT, and tungsten oxide shipments to the EU, we provide chemistry data on the certificate of analysis to support your REACH compliance documentation. Shipments are routed via Rotterdam, Hamburg, or Antwerp with onward EU distribution.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Europe

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets