Jayanth TungstenJayanth Tungsten ®

    🇪🇺 Export to Europe

    Fused Tungsten Carbide — Europe

    European hard-facing electrode manufacturers, concentrated in Germany and Poland, use fused tungsten carbide (W₂C) as the wear-resistant filler in overlay welding electrodes for excavator buckets, crusher hammers, and agricultural tillage tools. Austrian and Czech diamond tool producers separately specify fused W₂C grit in 40/60 to 100/120 ASTM mesh for brazing into segment and crown bodies. Both applications rely on the material's high hardness, 5.90 g/cc apparent density, and 3.5–4.1% total carbon content, confirmed per lot on the certificate of analysis. Jayanth Tungsten supplies fused W₂C as crushed grit (ASTM/BSS −40 to +600, to order) or cast rod for European hard-facing and diamond tool manufacturers.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS heading 8101.99 (other tungsten articles, fused carbide).

    Shipping to Europe

    Shipments to continental Europe are routed via Nhava Sheva or Mumbai to Rotterdam, Hamburg, or Antwerp, with sea transit typically 3–4 weeks, then onward distribution within the EU customs union. Tungsten powders and compounds fall under EU Combined Nomenclature heading 8101 (powders/carbides) or 2841 (tungstates); chemical products such as sodium tungstate and tungsten oxides are supplied with chemistry data to support REACH documentation. Pricing is quoted in EUR or USD on request.

    Industries we supply in Europe

    German, Czech & Austrian cemented carbide / hard-metal industry
    Scandinavian cutting-tool and electrical contact manufacturers
    Dutch and Belgian chemical processors and pigment formulators
    Diamond tool and hard-facing electrode producers

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Do you provide REACH-relevant documentation for chemical products?

    For sodium tungstate, APT, and tungsten oxide shipments to the EU, we provide chemistry data on the certificate of analysis to support your REACH compliance documentation. Shipments are routed via Rotterdam, Hamburg, or Antwerp with onward EU distribution.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Europe

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets