🇨🇴 Export to Colombia

    Tungsten Carbide Grit — Colombia

    Colombia's coal operations in Cesar and La Guajira, plus gold workings in Antioquia, consume large numbers of bucket teeth, crusher parts and conveyor chutes, and their maintenance shops are the likeliest buyers for hard-facing grit. Overlay rebuilds extend the life of these parts between replacements. Grit of about 3,000 HV is supplied in 30/40, 40/60, 60/80 and 100/120 mesh bands, with apparent density 5.5–6.0 g/cc. The coarser bands are usually preferred for the gouging wear that blasted overburden and coal produce.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Colombia

    Consignments for Colombia leave Nhava Sheva or Chennai for Cartagena on the Caribbean coast or Buenaventura on the Pacific, normally transhipped via Colombo, Singapore or a Panama hub, with total transit of roughly 5–7 weeks depending on the routing. Customs declarations with DIAN use tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Quotations are in USD.

    Industries we supply in Colombia

    Oil and gas drilling in the Llanos basin (Meta, Casanare)
    Coal mining in Cesar and La Guajira
    Gold mining in Antioquia and emerald mining in Boyacá
    Cement, aggregate and construction equipment maintenance
    Metalworking and tooling shops around Medellín and Bogotá

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Should I route my order to Cartagena or Buenaventura?

    It depends on where the material is used. Cartagena suits buyers on the Caribbean side and in the coal belt, while Buenaventura is closer to Cali and the southwest. We quote both routings with expected transit (typically 5–7 weeks) so you can compare landed cost; documentation is prepared for DIAN clearance under the relevant HS heading.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Colombia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.