🇨🇴 Export to Colombia

    Fused Tungsten Carbide — Colombia

    Drill bit and hard-facing service companies supporting Colombian oil wells and mines are the natural market for fused tungsten carbide. In matrix-body bits and impregnated core bits it resists the erosive wash of drilling fluid and cuttings, while in hard-facing rods it protects tool joints and stabilisers. The material carries total carbon 3.5–4.1% and an approximate melting point of 3000 °C, with apparent density 5.90 g/cc. Mesh fractions are cut to order across ASTM/BSS −40 to +600, with 40/60 and 60/80 being typical for rod and matrix work.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Colombia

    Consignments for Colombia leave Nhava Sheva or Chennai for Cartagena on the Caribbean coast or Buenaventura on the Pacific, normally transhipped via Colombo, Singapore or a Panama hub, with total transit of roughly 5–7 weeks depending on the routing. Customs declarations with DIAN use tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Quotations are in USD.

    Industries we supply in Colombia

    Oil and gas drilling in the Llanos basin (Meta, Casanare)
    Coal mining in Cesar and La Guajira
    Gold mining in Antioquia and emerald mining in Boyacá
    Cement, aggregate and construction equipment maintenance
    Metalworking and tooling shops around Medellín and Bogotá

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Should I route my order to Cartagena or Buenaventura?

    It depends on where the material is used. Cartagena suits buyers on the Caribbean side and in the coal belt, while Buenaventura is closer to Cali and the southwest. We quote both routings with expected transit (typically 5–7 weeks) so you can compare landed cost; documentation is prepared for DIAN clearance under the relevant HS heading.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Colombia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.