🇿🇲 Export to Zambia

    Tungsten Metal Powder — Zambia

    Copperbelt exploration keeps a steady flow of diamond core drilling going, but Zambia itself manufactures very few bit segments, so tungsten metal powder buyers are a small group of bit rebuilders and drilling supply importers in Kitwe, Ndola and Solwezi. What they need is a matrix powder whose grain size does not wander between lots. Jayanth Tungsten holds W min. 99.85% and O max. 0.06% across F.S.S.S. grades of 1.5–3, 4–6, 8–10 and 12–15 µm, packed in sealed steel drums suited to the long overland leg.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS subheading 8101.10 (tungsten powders).

    Shipping to Zambia

    Zambia is landlocked, so consignments go by sea from Nhava Sheva or Chennai to Dar es Salaam (about 2–3 weeks), then onward by road through the Tunduma–Nakonde border or by TAZARA rail to Lusaka or the Copperbelt; Walvis Bay and Durban are alternative gateways, with door-to-door transit typically 5–7 weeks. Tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD, and transit documents for the corridor country should be arranged with your forwarder in advance.

    Industries we supply in Zambia

    Copper mining on the Copperbelt (Kitwe, Ndola, Chingola, Mufulira)
    Copper mining and exploration drilling in North-Western Province (Solwezi)
    Emerald mining in the Kafubu area near Kitwe
    Mining equipment wear-part repair and hard-facing workshops
    Cement, quarrying and construction around Lusaka

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Which port do you use for shipments to the Copperbelt?

    Dar es Salaam is the usual gateway, with onward road or TAZARA rail carriage into Zambia; Walvis Bay and Durban can be quoted as alternatives. Total door-to-door transit is typically 5–7 weeks depending on corridor congestion, so we recommend comparing routings on landed cost and lead time before placing a repeat order.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Zambia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.