🇿🇲 Export to Zambia

    Fused Tungsten Carbide — Zambia

    Fused tungsten carbide is one of the better-matched products for Zambia, because copper exploration and production drilling on the Copperbelt consumes impregnated bits and hard-surfaced tools at a steady rate. Workshops use it both as matrix reinforcement and as the carbide phase in hard-facing deposits. The material carries a total carbon of 3.5–4.1%, an apparent density of 5.90 g/cc and a melting point of roughly 3000 °C, and it is screened ASTM/BSS −40 to +600 mesh to whatever fraction the application requires.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Zambia

    Zambia is landlocked, so consignments go by sea from Nhava Sheva or Chennai to Dar es Salaam (about 2–3 weeks), then onward by road through the Tunduma–Nakonde border or by TAZARA rail to Lusaka or the Copperbelt; Walvis Bay and Durban are alternative gateways, with door-to-door transit typically 5–7 weeks. Tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90). Pricing is quoted in USD, and transit documents for the corridor country should be arranged with your forwarder in advance.

    Industries we supply in Zambia

    Copper mining on the Copperbelt (Kitwe, Ndola, Chingola, Mufulira)
    Copper mining and exploration drilling in North-Western Province (Solwezi)
    Emerald mining in the Kafubu area near Kitwe
    Mining equipment wear-part repair and hard-facing workshops
    Cement, quarrying and construction around Lusaka

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Which port do you use for shipments to the Copperbelt?

    Dar es Salaam is the usual gateway, with onward road or TAZARA rail carriage into Zambia; Walvis Bay and Durban can be quoted as alternatives. Total door-to-door transit is typically 5–7 weeks depending on corridor congestion, so we recommend comparing routings on landed cost and lead time before placing a repeat order.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Zambia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.