🇶🇦 Export to Qatar

    Tungsten Carbide Powder — Qatar

    Rotating equipment, valves and pumps across Ras Laffan and Mesaieed rely on cemented carbide seal faces, seats and wear sleeves, and the workshops and fabricators that make or repair them are where WC powder demand in Qatar sits. Coating and wear-part makers often prefer the finer 2.5 µm F.S.S.S. grade at apparent density 2.4 g/cc for dense microstructures. Total carbon is held at min. 6.11% and free carbon at max. 0.03% on every certificate of analysis, figures that a sealing-component maker will check before qualifying a new source.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Qatar

    Qatar-bound cargo usually sails from Nhava Sheva or Mumbai to Hamad Port south of Doha, with direct or Jebel Ali-relayed services typically taking about 6–10 days. Qatar applies the GCC common external tariff: tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Prices are quoted in USD.

    Industries we supply in Qatar

    North Field gas production and LNG processing (Ras Laffan)
    Offshore and onshore oil and gas drilling and well services
    Petrochemical, steel and aluminium production (Mesaieed)
    Valve, pump and rotating-equipment maintenance workshops
    Construction and infrastructure contractors

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    Which port do you ship to in Qatar, and how long does it take?

    Consignments go to Hamad Port, normally from Nhava Sheva or Mumbai, with typical transit of about 6–10 days depending on whether the service calls direct or relays via Jebel Ali. Clearance follows the GCC common customs tariff, and each shipment carries a commercial invoice, packing list, certificate of analysis, SDS and certificate of origin.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Qatar

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.