🇶🇦 Export to Qatar

    Fused Tungsten Carbide — Qatar

    Drilling programmes on the North Field and onshore oil fields consume matrix-body PDC bits and hard-faced stabilisers, which is where fused tungsten carbide earns its place in Qatar. The buyers are bit repair centres and hard-facing contractors serving drilling operators. Fused carbide's eutectic structure, total carbon 3.5–4.1% and approximate melting point of 3000 °C make it the standard choice for erosion-resistant bit matrices. Fractions are screened to order between ASTM/BSS −40 and +600 mesh, and apparent density of 5.90 g/cc is recorded per lot.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Qatar

    Qatar-bound cargo usually sails from Nhava Sheva or Mumbai to Hamad Port south of Doha, with direct or Jebel Ali-relayed services typically taking about 6–10 days. Qatar applies the GCC common external tariff: tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Prices are quoted in USD.

    Industries we supply in Qatar

    North Field gas production and LNG processing (Ras Laffan)
    Offshore and onshore oil and gas drilling and well services
    Petrochemical, steel and aluminium production (Mesaieed)
    Valve, pump and rotating-equipment maintenance workshops
    Construction and infrastructure contractors

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Which port do you ship to in Qatar, and how long does it take?

    Consignments go to Hamad Port, normally from Nhava Sheva or Mumbai, with typical transit of about 6–10 days depending on whether the service calls direct or relays via Jebel Ali. Clearance follows the GCC common customs tariff, and each shipment carries a commercial invoice, packing list, certificate of analysis, SDS and certificate of origin.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Qatar

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.