🇴🇲 Export to Oman

    Tungsten Carbide Powder — Oman

    WC powder in Oman goes mainly to wear-part fabricators supporting onshore oil production, where artificial-lift equipment, chokes and valve trim face sand and high-velocity fluids. Steel and aluminium plants at Sohar add maintenance demand for wear-resistant components. Coarser grades of 10.0 and 15.0 µm F.S.S.S. suit impact-prone parts, while 2.5 µm gives finer microstructures for valve seats. Each certificate of analysis states total carbon min. 6.11% and free carbon max. 0.03% alongside measured grain size.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Oman

    Oman sits close to India's west coast, and shipments from Nhava Sheva or Mundra reach Sohar or Salalah in roughly 4–7 days, with Duqm available for projects in the central coast. Under the GCC common external tariff, tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is in USD.

    Industries we supply in Oman

    Onshore oil and gas drilling in the interior and south
    LNG production at Qalhat near Sur
    Steel, aluminium and petrochemical plants in the Sohar industrial area
    Chromite and copper mining, and marble and limestone quarrying
    Oilfield wear-part repair and hard-facing workshops

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    Is Sohar or Salalah the better port for an Omani order?

    Sohar is usually the practical choice for buyers in Muscat, the Batinah coast and the Sohar industrial area, while Salalah serves Dhofar and southern operations. Transit from Indian west coast ports is typically 4–7 days to either. Clearance follows the GCC common tariff, with HS codes 8101, 2849, 2841 or 2825 shown on the invoice.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Oman

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.