🇴🇲 Export to Oman

    Fused Tungsten Carbide — Oman

    Fused tungsten carbide's market in Oman follows the drilling rigs. Bit service shops and hard-facing contractors working the interior and southern oil fields use it in matrix bit bodies and hard-surfacing rods to resist erosion and abrasion downhole. Mining contractors developing chromite and copper deposits are a smaller second outlet. The product is supplied with total carbon 3.5–4.1% and apparent density 5.90 g/cc, in mesh fractions from ASTM/BSS −40 to +600, of which 30/40 and 40/60 are typical for rod filling.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Oman

    Oman sits close to India's west coast, and shipments from Nhava Sheva or Mundra reach Sohar or Salalah in roughly 4–7 days, with Duqm available for projects in the central coast. Under the GCC common external tariff, tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is in USD.

    Industries we supply in Oman

    Onshore oil and gas drilling in the interior and south
    LNG production at Qalhat near Sur
    Steel, aluminium and petrochemical plants in the Sohar industrial area
    Chromite and copper mining, and marble and limestone quarrying
    Oilfield wear-part repair and hard-facing workshops

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Is Sohar or Salalah the better port for an Omani order?

    Sohar is usually the practical choice for buyers in Muscat, the Batinah coast and the Sohar industrial area, while Salalah serves Dhofar and southern operations. Transit from Indian west coast ports is typically 4–7 days to either. Clearance follows the GCC common tariff, with HS codes 8101, 2849, 2841 or 2825 shown on the invoice.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Oman

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.