🇪🇪 Export to Estonia

    Tungsten Carbide Powder — Estonia

    Oil shale mining in Ida-Viru County wears through carbide-tipped cutting picks and drill bits, while Estonia's sawmills and wood processors consume carbide saw tips and knives. Most of that tooling is bought finished, so direct WC powder buyers are limited to a small number of local wear-part and tool producers. For mining parts, 10.0 and 15.0 µm F.S.S.S. grades give toughness; for wood-cutting edges, 2.5 µm is the better fit. Total carbon is min. 6.11% bonded and free carbon max. 0.03%.

    Total C ≥ 6.11%, F.S.S.S. 2.5–15 µm ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)2.5 | 5.0 | 10.0 | 15.0
    Apparent density (g/cc)2.4 | 3.2 | 4.8 | 6.0
    Total C (min. %, bonded)6.11
    Free C (max. %)0.03

    Applications

    Cemented tungsten carbide gradesDiamond segment manufacturingWear-resistant tooling

    Export packaging & documentation

    WC powder is packed in moisture-protected drums or lined bags, with each lot's total carbon, free carbon, and F.S.S.S. grain size stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including tungsten carbide).

    Shipping to Estonia

    Shipments to Estonia route from Nhava Sheva or Chennai to Hamburg, Rotterdam or Gdańsk and onward by Baltic feeder to Muuga Harbour near Tallinn, with total transit usually 5–7 weeks. Estonia applies the EU Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90), with composition data provided for REACH safety data sheets. Pricing is quoted in EUR or USD.

    Industries we supply in Estonia

    Oil shale mining and processing (Ida-Viru County)
    Limestone and dolomite quarrying (northern Estonia)
    Sawmilling, wood processing and forestry machinery
    Electronics and electrical equipment manufacturing (Tallinn, Tartu)
    Rare-metal and chemical processing (Sillamäe, Kohtla-Järve)

    Export questions

    What carbon content and grain sizes are available?

    Total carbon is min. 6.11% (bonded) with free carbon max. 0.03%, across F.S.S.S. grades from 2.5 to 15.0 µm and apparent densities from 2.4 to 6.0 g/cc. Specific grade combinations can be confirmed for export orders.

    How long does sea freight to Tallinn take?

    Usually 5–7 weeks, because Estonian cargo is transhipped at a North Sea or southern Baltic hub before the feeder leg to Muuga Harbour. Given that lead time, many Estonian buyers of small specialty lots prefer air freight to Tallinn, which we can quote alongside the sea option.

    Full Tungsten Carbide Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Carbide Powder (WC) specifications

    Request tungsten carbide powder pricing for Estonia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.