🇪🇪 Export to Estonia

    Fused Tungsten Carbide — Estonia

    Oil shale is crushed, conveyed and burned in quantity in north-east Estonia, and the crushers, conveyors, feeders and ash-handling equipment involved all wear hard. Hard-surfacing with fused tungsten carbide is one standard way to extend that equipment's life, so Estonian demand sits with welding consumable suppliers and maintenance contractors in the Ida-Viru industrial area. The cast carbide carries total carbon of 3.5–4.1% and melts at roughly 3000 °C; crushed fractions are screened from −40 to +600 mesh to order.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Estonia

    Shipments to Estonia route from Nhava Sheva or Chennai to Hamburg, Rotterdam or Gdańsk and onward by Baltic feeder to Muuga Harbour near Tallinn, with total transit usually 5–7 weeks. Estonia applies the EU Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90), with composition data provided for REACH safety data sheets. Pricing is quoted in EUR or USD.

    Industries we supply in Estonia

    Oil shale mining and processing (Ida-Viru County)
    Limestone and dolomite quarrying (northern Estonia)
    Sawmilling, wood processing and forestry machinery
    Electronics and electrical equipment manufacturing (Tallinn, Tartu)
    Rare-metal and chemical processing (Sillamäe, Kohtla-Järve)

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    How long does sea freight to Tallinn take?

    Usually 5–7 weeks, because Estonian cargo is transhipped at a North Sea or southern Baltic hub before the feeder leg to Muuga Harbour. Given that lead time, many Estonian buyers of small specialty lots prefer air freight to Tallinn, which we can quote alongside the sea option.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Estonia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.