🇷🇸 Export to Serbia

    Tungsten Carbide Grit — Serbia

    Vojvodina is among the most intensively farmed regions in the Balkans, and the plough points, subsoiler shins and harrow tines used across it are good candidates for carbide overlay. Agricultural machinery makers and service workshops there are the most likely Serbian buyers of hard-facing grit, alongside mining repair shops further south. Fractions of 30/40, 40/60, 60/80 and 100/120 are screened to order. At around 3,000 HV and 5.5–6.0 g/cc apparent density, the grit is far harder than the steel it protects.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Serbia

    Serbia is landlocked, so consignments from Nhava Sheva or Chennai are discharged at Thessaloniki or Piraeus in Greece, or at Koper or Rijeka on the Adriatic, and moved by rail or truck to Belgrade, for a total transit of roughly 5–6 weeks. Serbia is not an EU member and clears goods under its own HS-based customs tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Pricing is quoted in EUR or USD, and the commercial documents are prepared to support transit through the EU to the Serbian border.

    Industries we supply in Serbia

    Copper mining and smelting (Bor, Majdanpek)
    Open-pit lignite mining (Kolubara, Kostolac)
    Automotive and metalworking suppliers (Kragujevac, Novi Sad)
    Electrical and electronics manufacturing (Niš, Belgrade)
    Agricultural machinery and farm services (Vojvodina)

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    How do shipments reach Serbia without a seaport?

    Containers are discharged at Thessaloniki, Piraeus, Koper or Rijeka and moved inland by rail or truck under transit documents to a Serbian customs office, usually in or near Belgrade. Total door-to-port time is around 5–6 weeks; your forwarder can advise which gateway gives the best inland connection for your site.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Serbia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.