Jayanth TungstenJayanth Tungsten ®

    🇵🇭 Export to Philippines

    Tungsten Carbide Grit — Philippines

    Hard-facing grit serves Philippine mining equipment repair workshops and construction tooling suppliers, where overlay on buckets, chutes, ground-engaging tools and drill components is routine. Wet, abrasive nickel laterite ore tends to produce slurry erosion rather than pure gouging, which often points to the finer 60/80 band rather than the coarse cuts used in hard rock mining. Standard bands from 30/40 to 100/120 are supplied at approximately 3000 HV, screened narrowly for predictable carbide density at the wear face.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Philippines

    Shipments to the Philippines route from Nhava Sheva or Chennai to Manila or Cebu, typically 3–4 weeks by sea, often transhipped via Singapore or Port Klang. Tungsten powders and compounds clear under Philippine tariff headings corresponding to HS 8101 and 2841. Pricing is quoted in USD. The shorter transit compared with European and American destinations makes air freight less frequently necessary for urgent orders.

    Industries we supply in Philippines

    Nickel, copper and gold mining drilling operations
    Mining equipment wear-part fabrication and repair
    Construction and infrastructure tooling suppliers
    Electronics and electrical component manufacturers

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    What is the transit time to Manila?

    Typically 3–4 weeks by sea from Nhava Sheva or Chennai, often transhipped via Singapore or Port Klang. That is meaningfully shorter than our European and American routes, which is why Philippine buyers rarely need to consider air freight for standard orders.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Philippines

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets