Jayanth TungstenJayanth Tungsten ®

    🇨🇿 Export to Czech Republic

    Tungsten Carbide Grit — Czech Republic

    Czech hard-facing fabricators and wear-part producers — serving the Czech Republic's active quarrying, aggregate processing, and construction machinery sectors — use hard-facing tungsten carbide grit (apparent density 5.5–6.0 g/cc, Vickers hardness ~3,000 HV) in overlay welding electrodes and cladding plates for crusher jaw plates, bucket wear liners, and ground-engaging agricultural implements. The Czech Republic's position as a major Central European quarrying and construction equipment user drives consistent demand for hard-facing consumables and wear-plate products that extend service intervals of high-wear components. Jayanth Tungsten supplies crushed fused W₂C grit in mesh fractions from 30/40 to 100/120 to order, with apparent density and total carbon documented per lot for Czech hard-facing and wear-plate manufacturers.

    Mesh 30/40–100/120, ~3,000 HV ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Carbide Grit specifications

    Key specifications

    FormBlackish grey crushed grit
    Mesh sizes (to order)30/40, 40/60, 60/80, 100/120
    Apparent density5.5 – 6.0 g/cc
    Vickers hardness (approx.)~3,000 HV

    Applications

    OAW hard-facing overlaysMining drill bits & conesOil-field stabilizers & PDC bit bodiesWear-plate claddingAgricultural tillage tools

    Export packaging & documentation

    Hard-facing grit is supplied as crushed fused tungsten carbide in mesh fractions (30/40 to 100/120, to order), packed in moisture-resistant containers, with apparent density and total carbon stated on the certificate of analysis. Export classification is under HS heading 8101.99 (other tungsten articles).

    Shipping to Czech Republic

    Shipments to the Czech Republic are routed via Hamburg or Rotterdam, then overland by road freight, with total transit typically 4–5 weeks from Indian ports. The Czech Republic sits at the centre of Central Europe's manufacturing corridor — road freight from Hamburg or Rotterdam reaches Prague and Brno within 1–2 days. Tungsten powders and carbides clear EU customs under CN 8101; tungstate chemicals under CN 2841. Pricing is quoted in EUR on request.

    Industries we supply in Czech Republic

    Cemented carbide insert and tooling manufacturers (Pramet / Seco Tools, Tungaloy CZ)
    Precision hardmetal component and wear-part producers
    Diamond tool and cutting segment manufacturers
    Specialty engineering and heavy-industry wear-part fabricators

    Export questions

    What hardness can I expect from this grit?

    Hard-facing tungsten carbide grit has an approximate Vickers hardness of 3,000 HV, with apparent density 5.5–6.0 g/cc and total carbon 3.5–4.1%. Mesh fractions from 30/40 to 100/120 are available — confirm your application (overlay, cladding, drill cone) for a mesh recommendation.

    Can you supply WC powder for carbide insert production in the Czech Republic?

    Yes — our WC powder grades (F.S.S.S. 2.5–15.0 µm, total C min. 6.11% bonded, free C max. 0.03%, apparent density 2.4–6.0 g/cc) cover the grain size ranges used in Czech hardmetal insert manufacturing. Chemistry is fully documented per lot on the certificate of analysis. Contact us with your grade specification for pricing and lead time.

    Full Tungsten Carbide Grit specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Hard Facing Tungsten Carbide Grit specifications

    Request tungsten carbide grit pricing for Czech Republic

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets