Jayanth TungstenJayanth Tungsten ®

    🇨🇱 Export to Chile

    Tungsten Metal Powder — Chile

    Chilean demand for tungsten metal powder is narrower than in the European tooling markets and sits mainly with diamond core bit manufacturers supplying mineral exploration contractors in Antofagasta and Atacama. Tungsten raises the wear resistance of the segment matrix so it erodes in step with the diamond under the abrasive, quartz-rich ground typical of Andean copper porphyry deposits. Jayanth Tungsten supplies fine F.S.S.S. grades from 1.5–3 µm for hot-pressed segments and coarser 8–15 µm grades where matrix bulk and cost per kilogram lead, all at W min. 99.85% with oxygen max. 0.06% documented per lot.

    W ≥ 99.85%, F.S.S.S. 1.5–15 µm ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Tungsten Metal Powder specifications

    Key specifications

    Avg. particle size (F.S.S.S. μm)1.5–3 | 4–6 | 8–10 | 12–15
    Apparent density (g/cc)2.5 | 3.4 | 5.1 | 6.2
    W (min. %)99.85
    O (max. %)0.06

    Applications

    Diamond segments (hot pressing)Electrical contacts & fillersTungsten copper connectorsCounterweight & radiation shielding fillers

    Export packaging & documentation

    Tungsten metal powder is packed in sealed steel drums under nitrogen or vacuum to prevent oxidation during transit, each lot accompanied by a certificate of analysis stating F.S.S.S. grain size, apparent density, and chemistry (W min. 99.85%, O max. 0.06%). Export classification is under HS heading 8101.94 (tungsten powders).

    Shipping to Chile

    Shipments to Chile route from Nhava Sheva or Chennai to San Antonio or Valparaíso, typically 5–6 weeks by sea, usually transhipped via Singapore or Panama. Tungsten powders and compounds are declared under Chilean tariff headings corresponding to HS 8101 and 2841. Pricing is quoted in USD. Chile's low average tariff and extensive free trade agreement network make customs clearance comparatively straightforward, though the SAG and Aduanas documentation set should be confirmed with your customs agent before first shipment.

    Industries we supply in Chile

    Copper mining drilling and hard-facing services (Antofagasta, Atacama)
    Diamond core bit manufacturers for mineral exploration
    Mining equipment wear-part fabricators and repair shops
    Industrial chemical and reagent distributors

    Export questions

    What F.S.S.S. grain sizes are available for export?

    Standard grades range from 1.5–3 µm to 12–15 µm F.S.S.S., with corresponding apparent densities from 2.5 to 6.2 g/cc. Custom grain size targets can be agreed for larger export orders — share your application and we will confirm feasibility and lead time.

    Do you supply fused tungsten carbide grit to Chilean mining service companies?

    Yes. Chile is one of our mining-driven markets, and hard-facing grit and fused carbide are the products most commonly ordered. Shipments route to San Antonio or Valparaíso in 5–6 weeks with USD pricing and the full documentation set — commercial invoice, packing list, certificate of analysis and certificate of origin.

    Full Tungsten Metal Powder specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Tungsten Metal Powder (W) specifications

    Request tungsten metal powder pricing for Chile

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets