Jayanth TungstenJayanth Tungsten ®

    🇹🇼 Export to Taiwan

    Fused Tungsten Carbide — Taiwan

    Taiwanese diamond tool manufacturers producing segmented blades and core bits for the semiconductor substrate cutting, natural stone processing, and civil engineering sectors use fused tungsten carbide (W₂C) grit in diamond segment crown matrices, where consistent apparent density (5.90 g/cc), mesh fraction, and carbon content (3.5–4.1%) ensure repeatable segment performance across production batches. Taiwan's active construction sector — including ongoing infrastructure and urban development programs — drives demand for diamond core bits and hard-facing consumables. Jayanth Tungsten supplies fused W₂C as crushed grit in ASTM mesh fractions from 30/40 to 100/120 with chemistry confirmed per lot for Taiwanese diamond tool manufacturers.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment
    Request a Quote Full Specifications

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS heading 8101.99 (other tungsten articles, fused carbide).

    Shipping to Taiwan

    Nhava Sheva/Chennai → Kaohsiung/Keelung, 12–16 days, HS 8101/2841/2849, USD or NTD

    Industries we supply in Taiwan

    Cemented carbide insert and cutting tool manufacturers (Taichung/Changhua industrial zone)
    Printed circuit board (PCB) micro-drill and router bit producers
    Hard disk drive component and precision wear part manufacturers
    Diamond tool and CBN tool segment makers for semiconductor and stone processing
    Specialty metal powder importers and distributors

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Do you supply sub-micron WC powder for PCB micro-drill carbide grades?

    Yes. Jayanth Tungsten supplies WC powder in F.S.S.S. ranges from 2.5 µm upward; for sub-micron PCB micro-drill grades (F.S.S.S. 0.6–1.5 µm) please contact us with your specification for availability. All grades ship with full chemistry CoA under HS 2849 to Kaohsiung or Keelung with transit of 12–16 days from Nhava Sheva.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Taiwan

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.

    Request a Quote All export markets