🇸🇮 Export to Slovenia

    Fused Tungsten Carbide — Slovenia

    Fused tungsten carbide has a modest following in Slovenia among welding consumable producers, wear-protection specialists and diamond tool makers serving stone and construction cutting. Special steel producers in Ravne na Koroškem, Štore and Jesenice also run maintenance work where hard surfacing is routine. The material is a cast carbide with a melting point around 3000 °C, total carbon of 3.5–4.1% and apparent density of 5.90 g/cc, crushed and screened to the mesh fraction the customer specifies within −40 to +600.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Slovenia

    Slovenia has its own deep-sea gateway at Koper, which receives Suez-route sailings from Nhava Sheva or Chennai in roughly 3–4 weeks, with Ljubljana, Celje and Maribor a short road or rail haul inland. Imports clear under the EU Common Customs Tariff: tungsten metal powder under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Composition tables support REACH SDS requirements, and pricing is quoted in EUR or USD.

    Industries we supply in Slovenia

    Tool and die making and cemented carbide tooling (Ljubljana, Celje)
    Automotive component manufacturing (Novo Mesto, Maribor)
    Tool steel and special steel production (Ravne na Koroškem, Štore, Jesenice)
    Household appliance and electrical equipment manufacturing (Velenje)
    Natural stone and construction tooling

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Can you ship directly to Koper?

    Yes. Koper is the natural port for Slovenian buyers and sits on the Suez Canal route, so sea transit from Nhava Sheva or Chennai is typically 3–4 weeks — quicker than routing through the North Sea ports. Documentation is prepared for EU customs clearance at Koper under the applicable HS code.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Slovenia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.