🇳🇬 Export to Nigeria

    Fused Tungsten Carbide — Nigeria

    Fused tungsten carbide is one of the more relevant Jayanth products for Nigeria, because hard-facing and matrix work on drilling tools for the Niger Delta depends on it. Rebuild shops use it in tube rods and electrodes for stabiliser blades and reamers, while matrix bit producers blend it into infiltrated bodies. Its total carbon of 3.5–4.1%, melting point of about 3000 °C and apparent density of 5.90 g/cc are documented per lot, and mesh fractions can be supplied from −40 to +600.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Nigeria

    Shipments to Nigeria route from Nhava Sheva or Chennai to Lagos (Apapa, Tin Can Island or Lekki) or to Onne near Port Harcourt for oil-field buyers, typically 4–6 weeks by sea with transhipment. Tungsten metal powder is declared under HS 8101 (8101.10), tungsten carbide and fused carbide under HS 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80) and tungsten oxides under 2825 (2825.90); the importer opens a Form M through an authorised dealer bank before shipment, and its reference must appear on our invoice. Pricing is quoted in USD.

    Industries we supply in Nigeria

    Oil and gas drilling and oil-field services (Port Harcourt, Warri, Niger Delta)
    Granite quarrying and aggregate production
    Construction and infrastructure contractors
    Steel rolling, foundry and wear-part repair workshops
    Solid minerals exploration drilling

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    What documents do Nigerian importers need from you?

    We issue the proforma invoice for your Form M application, then a commercial invoice, packing list, certificate of analysis and certificate of origin that carry the Form M number and the HS heading for the product. Consignments can be routed to Lagos or, for Niger Delta oil-field users, to Onne.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Nigeria

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.