🇭🇷 Export to Croatia

    Fused Tungsten Carbide — Croatia

    Shipyards in Rijeka, Split and Pula, along with refinery and offshore gas maintenance teams in the Rijeka area, use hard-surfacing to restore pump impellers, valve seats and dredging parts. Fused tungsten carbide also goes into core bits used in geotechnical drilling for Croatia's road and coastal infrastructure. Jayanth Tungsten supplies cast carbide with total carbon 3.5–4.1% and apparent density 5.90 g/cc, screened to any ASTM/BSS fraction from −40 to +600 mesh, so overlay thickness and deposition method can be matched.

    Apparent density 5.90 g/cc, ASTM mesh 30/40–100/120 ISO 9001:2015 CoA with every shipment

    Fused Tungsten Carbide specifications

    Key specifications

    Mesh sizeASTM/BSS −40 to +600 (to order)
    Apparent density5.90 g/cc
    Melting point (approx.)3000 °C
    Total C (%)3.5 – 4.1

    Applications

    Diamond core drill bitsHard-surfacing electrodesDiamond tools for abrasive materialsWear-resistant coatings

    Export packaging & documentation

    Fused tungsten carbide is supplied as crushed grit in ASTM/BSS mesh fractions (−40 to +600, to order) or as cast rod, packed in moisture-resistant containers. Export classification is under HS subheading 2849.90 (carbides, including fused tungsten carbide).

    Shipping to Croatia

    Croatian shipments are routed from Nhava Sheva or Mumbai to Rijeka, or to Koper with a short road leg across the border, typically 3–5 weeks depending on transhipment; Ploče can be quoted for Dalmatian deliveries. Croatia uses the EU Common Customs Tariff and has used the euro since 2023 — tungsten metal powder clears under HS 8101 (8101.10), tungsten carbide and fused carbide under 2849 (2849.90), APT and sodium tungstate under 2841 (2841.80), and tungsten oxides under 2825 (2825.90). Composition data is supplied to support REACH SDS obligations; pricing is in EUR or USD.

    Industries we supply in Croatia

    Shipbuilding and ship repair (Rijeka, Split, Pula)
    Natural stone quarrying and processing (Brač, Istria)
    Oil refining and Adriatic gas field maintenance (Rijeka area)
    Metalworking and machine building (Zagreb, Karlovac)
    Construction and road-building equipment tooling

    Export questions

    Which mesh sizes are commonly exported?

    30/40, 40/60, 60/80, and 100/120 ASTM mesh are the most common export grades for diamond tool and hard-facing applications, though the full range from −40 to +600 mesh can be supplied to order.

    Do you deliver to Rijeka or through Koper?

    Both are possible. Rijeka is the main Croatian container port, while Koper is just across the Slovenian border and sometimes offers more frequent Suez-route connections. Sea transit is typically 3–5 weeks from Indian ports, and we will quote the routing that gives the better landed cost for your delivery address.

    Full Fused Tungsten Carbide specifications

    Complete grade table, selection guidance, quality control and packaging detail for this product, independent of destination.

    Fused Tungsten Carbide Powder (W₂C) specifications

    Request fused tungsten carbide pricing for Croatia

    Share your specification, quantity, and destination port — our sales team will respond with pricing, lead time, and documentation requirements.